This is our black glass digital frame table. It has a glass top and a glass base. The center post is sturdy and made of solid oak. It is 34 inches tall. 20 inches wide and 9 inches deep. Weight: 20lbs

This table is made for the 22 and 24 inch models.

The HD USB digital frame models can use internal memory. It is not necessary to have internal memory but is nice if you don't want a USB drive showing out the side of your frame. An access door on the back of your frame will allow you to add/remove internal memory if needed.

Bigeframe can also preload your internal memory with your media content at no extra charge. Send us your media and we'll put it onto the internal drive.

Our new digital frame models can use USB flash drives. They read and play straight from your USB drive. You can supply your own memory storage or buy one of ours. A 4GB USB can hold over 4,000 quality images. Name brand may vary.

The hard aluminum travel case is made to be slim and stylish. It offers protection to your frame during traveling. Can carry the 22 or 24 inch digital frame.
Measures: 24x16x4 : 8lbs

The soft black carrying case is useful if you need to carry your frame to and from a nearby location. This case was designed specially for our Bigeframe models. It has a shoulder strap, cushioned sides and clip together fasteners. Room inside for the cord, remote control, and memory cards.
Measures: 22x13x3 : 2lbs

Note: Traveling with our frames will not be covered under warranty. Travel at your own risk. Damages to the frame while on the road will be treated as accidental damage. We do offer repair services, call in for a quote if needed.

Screens need to be shipped upright while traveling. They should be treated like a sheet of glass.

Bigeframe travel case and carrying case (click pics to enlarge)

Our cases can carry the 19, 20, 22, and 24 inch widescreen frames. The soft or aluminum case is great for protecting your frame when traveling to and from trade shows or special events.

Bigeframe Table Stands (click pics to enlarge)

If you want to set your frame on a desk or table, these simple stands will do the trick. The first picture shows our aluminum feet. They slide onto the bottom of your frame.

The other table stands are also made of aluminum and hold the digital frames at a comfortable viewing angle. Get one of these stands if you have a wooden overlay and need to set up your frame on a table. Frame will rest on the front outer edge of stand and sit back about 15 degrees. Click on each image to enlarge.

Large Table Stand
Holds 32 and 42in. -$59.00

Small Table Stand
Holds 19 - 27in $24.00

Bigeframe adjustable height Floor Stands

These are our new adjustable height floor stands. Black and chrome finish.
Quick and easy set up in about 5 minutes. The height of both floor stands is adjustable.
Sits up to 65 inches high. They can be lowered to sit at a height of 30
inches.

They can also hold signs like posters and banners below the frame area for extra
appeal. Our floor stands work great if you are using your Bigeframe for a business
demonstration, convention, or trade show. Weight 12-15 lbs. base measures
18in.x14in.x2in.. for the 32 inch style and 36in.x14in.x2in. for the 42in. style.

Watch our demonstration setup video. (Click here) and look for video #4

The surge protector is useful if you want to give extra protection to your frame
from power surges and brown outs. This model has a flat plug, 2 outlets
plus 2 USB charging docks.

22-32" floor stand - $119.00

42" floor stand - $139.00

VESA hole mod. Secure Clips. Power Cords.

Each Bigeframe has a flat aluminum back with tracking that surrounds the outer edge. All models will ship with a wall mount that allows you to hang your frame flat on a wall. The back tracking is used to hang our frames.

If you already have a mount that you want to use instead and need a VESA hole pattern please order one to the right. Screw size needed will be 4mm.

The VESA pattern that we offer for the 32inch and smaller screens is 100mm x 100mm. The 42 and 55 inch will automatically come with a pattern.

The security clips to the right will screw into the back tracking. This will give an instant mounting hole for a more secure way to attach your frame to a wall.

A Flat Power cord is useful if you have your power plug behind the digital picture frame.

All Bigeframe digital frames come with a flat track wall mount initially. If you need your frame to tilt or be adjustable get the mount shown here. This mount attaches to a wall and to the VESA adapter on the back of an upgraded Bigeframe. With it, you can tilt your frame in multiple directions. Please add this mount upgrade to your digital frame at time of purchase or this item will not work for you. Attachment holes must be drilled in advance for the adjustable mounts to work.

360 degree mount allows you to easily turn your frame from landscape to portrait. Watch Video #2 for more. This mount must be ordered with frame. It has to be pre-attached to frame.

The ceiling mount to the right is useful if you want to hang your frame from the ceiling. Package comes with 2 lengths of 52 inch decorative brass chains. 2 each of: eye hooks, commercial ceiling hooks, and S hooks. Watch Video #7 to see how to hang a frame from the ceiling.

Your screen will look its best with our screen cleaner. Includes microfiber cloth. The Kensington lock upgrade will allow you to tether your bigeframe to help deter theft. An extra hole will be added to your Bigeframe that this lock will attach to. Lock cable is 24 inch long with 4 digit combination.

Automate your picture frame by getting this
lcd plug timer. It has 2 outlets and a host of other timing features. It will automatically turn on and off the main power to your frame at any specified time. Together with the auto start feature of your frame you won't have to touch a thing. Works with our 22 to 27 inch HD frames. Not recommended for our 32 to 42 inch screen. .

CAT5 network port upgrade is available on WiFi models only. If you want to add a wired network connection option to your frame then get this upgrade. This allows you to show photos and video from your local network. Connect to Flickr and Netflix.

HD USB remote - $39.00

Call for this item

WiFi remote - $99.00

call for this item

The overlay frames are made of ash wood and they work with all bigeframe models. No tools needed! All you do is press them onto the face of your digital frame. Foam on the inner edge keeps them tightly mounted to frame.
The wooden frames look great and will give a more traditional look to your digital picture frame.

Below are the 3 color choices that we offer.

Click to enlarge

Add some style to your frame. Get a brass plaque with your company or school name engraved on it.

These plaques are a half inch tall with one line of text. Type in your text in the message box to the right and we'll get a plaque made. Comes with sticky back and tapered corners. You can apply it to your frame where needed. Allow 1-2 weeks for production.